ANTIK WallBox Dual AC 22kW
Power: 2× 22 kW AC
Input voltage: 3×63 A, 400 V
Connector: Type 2 socket
Safety features:
- Type B residual current device
- Zeroing protection
- Emergency output disconnection button
Connectivity:
- GSM 4G
- LAN 10/100Mbit
- RS485
- OCPP ver1.6
- WiFi/Bluetooth for local connection
User interface:
- LED indicators for each output
- OLED display on the side
- MiFare card reader
Operating temperature: -20°C to +60°C
Protection: IP54 (dust and water resistant)
Mounting: Wall mounting or mounting on a special pole
ANTIK SmartCity WallBox Dual AC 22kW ATK-SCEV4B: Instructions in .PDF can be downloaded HERE.
Powerful dual charging
ANTIK WallBox Dual AC 22 kW is a modern solution for charging electric vehicles, which allows simultaneous and full charging of two vehicles at once. Thanks to Type 2 outputs and a maximum power of 2× 22 kW, the device is suitable for households, corporate fleets and public charging points where speed, efficiency and reliability are important. Dual charging eliminates the need to install multiple charging points, which saves space and investment.
- 2×22 kW power – parallel charging of two electric cars.
- Electricity meter with energy counter on each outlet
- Support for all vehicles with Type 2 connector.
- Flexible installation – wall mounting or special pole mounting according to needs.
- Efficient solution – saves space and costs compared to multiple wallboxes.
Stable LAN connectivity and remote management
ANTIK WallBox Dual AC 22 kW uses a LAN Ethernet interface (10/100 Mbit) as the primary communication channel, ensuring high stability and reliability of data transmission. The Ethernet connection eliminates typical problems of wireless technologies, such as latency, interference or signal loss, making it the optimal choice for corporate and commercial installations.
- Deterministic data transmission – stable communication without dropouts or signal fluctuations.
- Fast , real-time response – crucial when managing multiple charging points.
- Seamless integration – compatibility with existing corporate LAN/WAN networks.
- Increased level of security – minimizes the risk of unauthorized access compared to WiFi.
- Scalability – a suitable solution for networks with dozens of charging stations.
OCPP support – companies, hotels and consumption evaluation
The ANTIK WallBox Dual AC 22 kW supports OCPP version 1.6 , which is an international standard for charging station communication with central systems. This feature allows businesses, hotels and commercial establishments to easily manage multiple chargers from one place , monitor energy consumption and set access for customers or employees.
In practice, this means that charging can be directly linked to the hotel's billing , loyalty program or accommodation system. Energy consumption is recorded and assigned to a specific user or card, which simplifies cost evaluation . This brings transparency for companies, added value for hotels and easy access via cards or apps for customers.
Recommended third-party OCPP platforms
Compatibility with systems such as Seak (paid) and Steve (open-source) allows for central management with a clear overview of who charged when and where and a direct connection to billing/CRM .
- SteVe is an open-source OCPP server (CSMS) developed by the community/RWTH Aachen; it is used to manage charging points and supports OCPP 1.6 (and later). GitHub +2 rwth-i5-idsg.github.io +2
- SEAK is a commercial provider of EV charging solutions ; their “Seak Charge”/backend integrates with chargers via OCPP and allows for management of locations, pricing, and users.
Multi-column
Charger front panel
The front of the ANTIK WallBox combines modern design with functional elements. An LED indicator shows the device status, the user has a MiFare reader for authorization and two Type 2 power connectors for simultaneous charging of two vehicles.
- (1) LED indicator strip – colored light indicates charging status and device readiness.
- (2) Charger logo – space for branding or design customization.
- (3) MiFare card slot – fast and secure user authorization.
- (4) Output connector 1 – Type 2 socket for the first vehicle.
- (5) Output 2 connector – Type 2 socket for the second vehicle.
Charger side panel
The sides of the WallBox contain key technical and safety features. Here the user will find a LAN port for network connection, an OLED display for basic information, as well as an emergency button for immediate disconnection of the outlets.
- (1) LED indicator strip – indicates the charger status.
- (2) LED strip with text – displays information about charging progress
- (3) Security lock – allows authorized access for service and maintenance.
- (4) Charging connector (left side) – hard-wired cable with Type 2 vehicle connector.
- (5) LED indicator strip (right side) – same signaling on the other side.
- (6) LED strip with text (right side) – again a text LED panel showing charging status.
- (7) Output connector 1 – Type 2 socket for the second vehicle.
- (8) Output connector 2 – Type 2 socket for the first vehicle.
User interface and convenient operation
The WallBox was designed with operator comfort in mind, even in demanding operations. LED indicators for each output provide immediate visual status, while the side OLED display shows detailed charging progress data and notification messages. The MiFare card reader ensures controlled access only for authorized users (employees, guests, external suppliers). For central management , the Antik Cloud web interface is available, through which remote monitoring, planning, rights assignment and consumption evaluation can be performed.
- LED indicators – instant overview of output status.
- OLED display – detailed display of current charging data.
- MiFare card reader – access only for authorized users.
- Antik Cloud – remote control, scheduling, user management and consumption history.
Intelligent energy management and photovoltaics
The device offers advanced charging management with the possibility of dynamic selection of modes , which allow the user to optimize energy consumption. In addition to the classic charging mode, the SURPLUS mode can also be activated, in which the wallbox uses excess solar energy from photovoltaics. Thanks to the connection to the inverter via MODBUS TCP, the device can adapt the power to the current electricity production, thereby reducing the consumption from the grid and reducing costs. This approach is not only economically advantageous, but also ecological, as it supports the maximum use of renewable resources.
- Two charging modes – standard and energy-saving from photovoltaic surpluses.
- Direct connection to PV - simple communication with the inverter without complex installation.
- Optimized costs – reduced dependence on the distribution network.
Wiring diagram
The most efficient way to use photovoltaics is to use as much of the energy produced as possible directly in the home. The optimal use of energy is during the day, for example in the form of charging a connected electric vehicle. The ANTIK WallBox Dual AC 22 kW allows you to direct the flows from the photovoltaic inverter to charge an electric vehicle, without the need for complex installation.
Vehicle charging function from photovoltaic surplus
The Wallbox detects the presence of a home PV inverter in the local network, and then regularly reads data on the flow into the network from the inverter using the MODBUS TCP protocol . Based on this information, the charging performance is controlled. All operating data is recorded and available in the Antik Cloud web interface , where it can be viewed, exported and evaluated in real time.
Safety first
Safety is key when charging electric vehicles, and the ANTIK WallBox Dual AC 22 kW therefore includes multiple protective features that ensure maximum reliability of operation. The integrated type B residual current device protects against current leakage, zeroing protection reduces the risk of malfunctions, and the emergency button allows immediate disconnection of the outputs in the event of an accident or malfunction. Thanks to the IP54 protection, the device is dust and water resistant, making it suitable for both indoor and outdoor installation.
- Type B residual current device – protection against fault currents during charging.
- Emergency button – immediate stop of operation in a critical situation.
- IP54 protection – reliable protection against dust and splashing water.
- Network and car safety – eliminating the risk of damage to the battery or electrical installation.
Tailor-made design flexibility
In addition to the technical parameters, the ANTIK WallBox Dual AC 22 kW also offers design adaptability when purchasing multiple units , which allows you to match the device to the environment where it will be installed. The customer can choose the color of the front plastic, the design of the LED strips and add a logo or graphic elements, making the wallbox fit perfectly into the visual identity of the company or household.
- Custom color – possibility to choose the shades of the front panel.
- LED elements – design customization of light strips.
- Branding – integration of a company logo or visual identity.
- Aesthetic added value – a suitable solution for both commercial and private projects.
Frequently Asked Questions: Antik SmartCityWallBox Dual AC 22kW
What are the mounting options?
The WallBox can be installed by wall mounting or on a separate pole . The structure is designed for easy assembly and service access.
What type of connector is used?
The station has two Type 2 sockets , which are currently the standard for European electric cars.
What communication interfaces does WallBox support?
Only LAN/Ethernet (10/100 Mbit) is supported. Thanks to the OCPP 1.6 protocol, the device is compatible with operator backend systems (management, monitoring, billing) via a fixed LAN network.
What are the operating conditions?
The device is designed to operate in a temperature range from -20 °C to +60 °C . IP54 protection guarantees resistance to dust and splashing water.
How does integration with photovoltaics work?
The WallBox communicates with the photovoltaic power plant inverter via the MODBUS TCP protocol , evaluates energy flows into the network and controls the charging power (standard or surplus mode) accordingly.
Does the WallBox have integrated consumption measurement?
Yes. Each output has an electricity meter with an energy counter and displays the current consumption/power . The measured data is available locally (OLED/LED indication) and in the Antik Cloud web interface for detailed overview, exports and evaluation.
How is user authorization done?
Access to the device can be controlled via a MiFare card reader , making the station suitable for corporate fleets or public installations.
Do you have a question about a specific product, its features, technical parameters, or automation options in your home? We are here for you and will be happy to help you choose the right solution or explain the settings.
Write to us at predaj@antik.sk and our team of experts will respond to you as soon as possible. Your satisfaction and the proper functioning of your devices are our priority.
